The production method of Hdtv TV antenna based on 5G network

The main function of Hdtv TV antennas is to enhance wireless network signals. When selecting an antenna, attention should be paid to whether the antenna connector matches the connector of the connected device. At the same time, WIFI antennas are divided into two categories: internal and external. External antennas are generally used in wireless routers and other products. Built in for use in products such as smartphones and mobile computers.
The existing WIFI antennas do not have a telescopic function, and Hdtv TV antennas do not have a telescopic extension structure. It is often necessary to adjust the length of the WIFI antenna to improve the WIFI signal. The existing WIFI antenna protection structure is not perfect, and Hdtv TV antennas have shortcomings in anti-corrosion and waterproofing. When using WIFI antennas, it is easy to cause safety hazards. There is an urgent need for a WIFI antenna based on 5G network to solve the above problems. In response to the shortcomings of existing technology, the purpose of this utility model is to provide an Hdtv television antenna based on a 5G network to solve the problems proposed in the background technology. The structure of this utility model is reasonable, convenient for length adjustment, fireproof insulation, and high safety.
In order to achieve the above objectives, the present utility model is implemented through the following technical solution: a WIFI antenna based on 5G network, including a WIFI antenna body, a telescopic mechanism, a threaded interface, and a protective mechanism. The protective mechanism is set inside the WIFI antenna body, the telescopic mechanism is set at the lower end face of the WIFI antenna body, the threaded interface is installed on the lower side of the telescopic mechanism, the telescopic mechanism includes a micro push rod, a connecting rod, a housing, and an telescopic button, the connecting rod is installed on the lower end face of the WIFI antenna body, the connecting rod is connected to the lower end face of the WIFI antenna body, the micro push rod is assembled on the lower end face of the connecting rod, and the micro push rod is installed on the lower end face of the connecting rod. Connected to the WIFI antenna body through a connecting rod
Due to the addition of a filling layer, insulation layer, fireproof and flame-retardant layer, barrier layer, flexible steel wire, and protective sleeve in this utility model, the design increases the safety of WIFI antenna use, eliminates the occurrence of electric shock hazards, solves the problem of incomplete protection structure of the original WIFI antenna, and improves the safety of use of this utility model.
Due to the insulation layer being made of cross-linked polyethylene material, this design increases the insulation of the insulation layer. As the fire-resistant and flame-retardant layer is made of polyolefin material, this design can prevent the generation of obvious smoke and harmful gases during flame retardancy, improving the environmental friendliness of this utility model. Due to the hollow parts inside the micro push rod and connecting rod, this design facilitates the line connection between the WIFI antenna body and the router. The structure of this utility model is reasonable, convenient for length adjustment, fire-resistant insulation, and high safety.
The main body 1 of the Hdtv TV antenna manufacturer is connected to the router through a threaded interface 3. The micro push rod 21 and connecting rod 22 are both equipped with hollow parts inside. The telescopic button 24 is connected to the external power supply through a wire, and the micro push rod 21 is connected to the telescopic button 24 through a wire. The insulation layer 42 is made of cross-linked polyethylene material, the fire retardant layer 43 is made of polyolefin material, and the WIFI antenna main body 1 is equipped with a 5GWIFI module inside.